Glueboard Fly Machines

Glueboard Fly Machines consists of ultra-violet bulbs to attract the flies, however unlike the electronic fly machines, with an electrified grid, these have a replaceable custom made glue pad which flies get stuck to. These machines are designed to be left on continually and are merely a control measure for the flies which may have breached physical barriers, such as fly screen doors or windows or chain door curtains.

The positioning when installing these machines must be taken into consideration as if situated wrongly the machines may not reach their full potential in fly control. It is not adviseable to consider installing these glueboard machines directly above food preparation or manufacturing areas as there could be a risk of contamination should dead flies fall from these machines. Empire can supply these units as well as standard bulbs/shatter resistant bulbs, starters and replacement sticky pads along with a regular service plan. We can provide additional information or discuss which unit is best suited for your needs by simply using our contact page.

Chameleon Range

Chameleon 1×2
  • White or stainless steel
  • Suitable for hose down areas
  • Corrosion resistant
  • 2×15-watt Quantum BL tubes
  • Weight: 6.1kg
  • Height: 31cm
  • Width: 50cm
  • Depth: 10cm
  • Price: On Request
Chameleon 2×2
  • White or stainless steel
  • Ceiling suspended
  • 360° attraction
  • 4×15-watt Quantum BL tubes
  • Weight: 6kg
  • Height: 31.5cm
  • Width: 48.5cm
  • Depth: 12.5cm
  • Price: On Request
Chameleon 4×4
  • White finish
  • Suitable for open industrial areas
  • Lower running costs
  • 4×40-watt Quantum BL tubes
  • Weight: 11.75kg
  • Height: 61.5cm
  • Width: 63.5cm
  • Depth: 16.5cm
  • Price: On Request

Fly Shield Range

Fly Shield One
Fly Shield Two
Fly Shield Hanging

Wall-mounted or suspended. Stylish design. Stainless steel construction. A very discreet fly control unit. Long-lasting glue boards which are easy to change. High attraction levels and energy saving tubes. CE Approved and tested to BS EN600598-1.

Fly Shield One Dimensions: H: 250mm   W: 345mm   D: 15mm Price: On request

Fly Shield Two Dimensions: H: 250mm   W: 585mm   D: 140mm Price: On request

Fly Shield Hanging Dimensions: H: 140mm   W: 470mm   D: 650mm Price: On request

Insect-A-Clear & X-Fly Range

Insect-A-Clear Fusion 2
All steel construction fly control unit can be wall mounted or suspended. Tested to BS EN60335-1. 50% additional output with special glue board technology. Available in 2 bulb (Fusion2) or 4 bulb (Fusion4) as above.

Fusion 2 Dimensions: H: 380mm   W: 510mm   D: 90mm

Fusion 4 Dimensions: H: 380mm   W: 665mm   D: 130mm

Price: On request

Insect-A-Clear Fusion 4
X-Fly 1
  • Stainless steel construction
  • Can be wall mounted
  • Height: 100mm
  • Width: 400mm
  • Depth: 270mm
  • Price: On Request